Picosystem® Plus

Performance

Resistivity: 18 megohm-cm (@25° C)
Conductivity: 0.056 micromhos/cm (@25° C)
TOC: <20 ppb
Bacteria: 10 CFU/mL (<0.1 CFU/mL with capsule postfilter)
Sodium: <1 ppb
Hardness: 0 ppb
pH: 6.8 - 7.0
Flow Rate: 0.5 gpm (1.9 Lpm)
(feed water quality may vary results)

Features

  • 10" Polypropylene Filter Housing
  • 10" x 0.2 Micron Filter Cartridge (other micron sizes available)
  • 6" x 18" Activated Carbon Adsorber (.28 ft³)
  • Highly Activated Bituminous Grade Carbon Media
  • 6" x 18" Primary and Polishing Mixed-Bed Deionizers (.28 ft³/ea)
  • Service Indicator Light
  • Type I Strong Base Anion and Strong Acid Cation Resins
  • Polyethylene Interconnecting Tubing
  • Resistivity Monitor (optional)
  • Plus Pump Station
  • Picotap® Faucet

Description

The Picosystem® Plus combines the Plus Pump Station for recirculation with Hydro’s basic point-of-use (POU) water purification system to produce low TOC, ASTM and CAP Type 1 Reagent Grade Water for analytical laboratory applications. The Picosystem® components include one organic adsorber containing highly activated carbon media for chlorine/chloramine removal and TOC reduction, one primary and one polishing mixed-bed deionizer containing pharma-grade cation/anion resins, a service indicator light and polyethylene interconnecting tubing. Recirculation lowers TOC to <20 ppb and allows for the addition of a resistivity monitor if desired. Hydro manufactures a selection of Picotap® faucets made of UHMW virgin polypropylene and polyethylene to complement the Picosystem’s® quality.