|
|
Hydro's Reverse Osmosis Systems provide an economical and efficient
method for the purification of tap water. RO is the optimum pretreatment
system for deionization and other final treatments. We provide a
wide range of flow rates and capacities from point-of-use laboratory
systems to high volume process manufacturing. Systems are skid mounted,
pre-plumbed and wired. Units can include control panels that are
UL listed for central monitoring and control.
|
|
Hydro
Grant Manager
Reverse Osmosis that Saves Money.
The
Grant Manager Reverse Osmosis System is designed to provide
inexpensive pretreatment for ultrapure water systems that
have poor feed water and for usage in excess of 2 gallons
per day. The Grant Manager is small enough to fit under most
sinks and operates on normal tap water pressure, thus eliminating
the use of pumps and electricity.
This
system reduces operating cost up to 80% as pretreatment for
your deionization systems. It improves water purity by removing
organic acids, colloids, organic molecules > 200 mw and
90% of dissolved solids before the DI system. This reduces
the load on the DI system, allowing it to purify greater quantities
of water.
The
Grant Manager is a compact and easy to install. It is an economical
investment that often pays for itself in the first six months.
Call your Hydro representative today to analyze your specific
dollar savings. |
|
Features
-
Thin
Film Composite (TFC), spiral-wound membrane
-
10"
carbon and 10", 5 micron prefilter cartridges
-
Automatic
feed-water shut-off valve
-
Manual
shut-off valve at tank
-
Polypropylene
construction
|
Performance
Capacity |
15
gals/ 8 hr day, 50° F, 50 psi |
Pressure |
Maximum
100 psi |
pH
Range |
Optimum
5 - 8 |
Recovery |
15-20% |
Rejection |
88-95%
|
RO
Size |
16.5"
w x 5" d x 17" h |
Tank
Size |
9"
dia. x 22" h |
Connections |
1/4"
OD PE tubing |
Flow |
0.25
- 0.5 gpm |
|
Click
here for a printable PDF version of Grant Manager
Literature.
Back
to Top
Line
Pressure Reverse Osmosis System
Hydro's
Line Pressure reverse osmosis system, ROLP190, purifies water
using a membrane separation process for removing dissolved
salts, macromolecules, colloids and particulates.
This
reverse osmosis product is used as a pretreatment to deionization
systems and can extend the life of your system by up to 800%.
There are a number of significant advantages with Hydro's
RO system: self-contained and preplumbed, the unit comes ready
for easy installation; industrial grade components offer increased
reliability; and thin-film membrane technology offers maximum
salt rejection and maximum recovery.
The
biggest advantage of this RO is its cost. Not only does it
produce quality water for less than a penny a gallon, but
operating costs are 1/10 those of distillation. Hydro has
priced the ROLP190 with your budget in mind, making it a smart
choice for any lab. |
|
Benefits
-
Ideal
for use as pretreatment for deionization systems
-
Compact
for use in the laboratory
-
Inexpensive
to purchase and operate, increasing deionization system
life by up to eight times
-
Provides
CAP Type III Reagent Grade Water*
-
Removes
organic acids, colloids, organics > 200 molecular weight,
and 90% of all dissolved solids
*feed
water quality may vary this result
|
Features
-
Operates
on normal tap water pressure
-
Polyurethane-coated,
aluminum construction with wall mounting bracket included
for easy installation
-
Feed
water solenoid valve (1/4" brass) for automatic operation
from tank level control switch (120 VAC) or hydraulically
operated permeator valve.
-
Activated
carbon cartridge prefilter (10") for complete chlorine
removal
-
Thin-film
composite, spiral-wound membrane (30 sq. ft.) for maximum
water production
-
Reinforced
polypropylene filter and membrane pressure vessel
-
Liquid
filled, feed water pressure gauge (0-100psi)
-
Pressure
relief valve (1/4" brass)
|
Click
here for a printable PDF version of Line Pressure
RO information.
Back
to Top
Series
A Reverse Osmosis System
Hydro's
Reverse Osmosis Systems purify water utilizing a membrane
separation process to remove dissolved salts, macromolecules,
colloids and particulates. Reverse Osmosis is often used
as pretreatment to deionization and other final treatments.
It also provides high purity water for other applications
including a wide variety of manufacturing processes.
In
addition to being self-contained and ready for installation,
Hydro's Reverse Osmosis Systems come equipped with complete
systems monitoring instrumentation. Hydro uses industrial
grade components for increased reliability. We also offer
a wide variety of membranes and flow capacities with average
salt rejections to 99 percent.
Perhaps
the most important advantage of a Hydro Reverse Osmosis
System is the monetary savings you will realize - high quality
water for less than a penny per gallon. Operating costs
average less than 1/10 of the cost of distillation. Reverse
Osmosis pretreatment extends the lifespan of downstream
deionization systems by as much as eight times, drastically
reducing this costly operating expense. Service and maintenance
contracts are available to enhance your overall cost savings. |
|
Features
-
Heavy
duty polyurethane-coated aluminum cabinet to resist
corrosion
-
Spiral
wound membranes with stainless steel pressure vessels
-
Rotary-vane
positive displacement pump
-
Feed
water low pressure shut down for pump protection
-
Nylon high pressure tubing
-
Feedwater,
pump and concentrate pressure gauges
-
Concentrate
and permeate flow gauges
-
Level
control for auto operation
-
NEMA
3R electrical enclosure
-
Timer
controlled automatic flush
-
Temperature compensated, dual channel resistivity monitor
for water quality control
-
UL
listed product
|
|
Click
here for a printable PDF version of Series
A literature.
Back
to Top
Series
C Reverse Osmosis System
Reverse
osmosis is a membrane separation process used for removing
dissolved salts, organics, microorganisms, and particulates
from water. In natural osmosis, the net transfer of water
molecules across the membrane is from the side of the membrane
with the more dilute salt concentration. In reverse osmosis,
feed water with dissolved salts (solutes) flows under high
pressure accross the surface of the membrane overcoming the
natural osmotic pressure and allowing water to permeate from
the brine side of the membrane to the pure water side of the
membrane.
The
Series C Reverse Osmosis System produces Type III or IV Reagent
Grade Water and is ideal for central water purification. It
provides an economical source of pretreated water for supplying
multiple point-of-use polishing systems. Reverse osmosis can
extend the available throughput of cartridge deionization
systems by as much as 6 to 8 times, greatly improving the
economy of operation and the water quality. |
|
Features
-
Heavy
duty polyurethane-coated frame
-
Spiral
wound, TFC, membranes
-
Stainless
steel pressure vessels
-
Rotary-vane
positive displacement pump
-
Feed
water low pressure shut down for pump protection
-
Nylon
high pressure tubing
-
Pump
and pressure gauge
|
|
Click
here for a Printable PDF version of Series C information.
Back
to Top
Series
D Reverse Osmosis System
Hydro's
Reverse Osmosis Systems purify water utilizing a membrane
separation process to remove dissolved salts, macromolecules,
colloids and particulates. Reverse Osmosis is often used
as pretreatment to deionization and other final treatments.
It also provides high purity water for other applications
including a wide variety of manufacturing processes.
In
addition to being self-contained and ready for installation,
Hydro's Reverse Osmosis Systems come equipped with complete
systems monitoring instrumentation. Hydro uses industrial
grade components for increased reliability. We also offer
a wide variety of membranes and flow capacities with average
salt rejections to 99 percent.
Perhaps
the most important advantage of a Hydro Reverse Osmosis
System is the monetary savings you will realize - high quality
water for less than a penny per gallon. Operating costs
average less than 1/10 of the cost of distillation. Reverse
Osmosis pretreatment extends the lifespan of downstream
deionization systems by as much as eight times, drastically
reducing this costly operating expense. Service and maintenance
contracts are available to enhance your overall cost savings. |
|
Features
-
Self-contained
on polyurethane-powder-coated steel frame
-
Feedwater
low pressure cut-off for pump protection
-
High
pressure pump - 316 SS vertical, multistage, centrifugal
pump
-
Spiral
wound thin-film membranes with fiberglass reinforced
plastic pressure vessels or stainless steel for highest
quality and longest lifespan.
-
316
SS high pressure piping
-
Resistivity
and % rejection monitor for water quality control
-
PLC
Control Panel (optional)
-
Electrical
equipment contained in NEMA 12 enclosure
-
Concentrate
and permeate flow gauges
-
Pump
and concentrate pressure gauges
-
UL
listed product
|
|
Click
here for a printable PDF
version of Series D information.
Back
to Top
RO
Squared Hydro's
Compact Reverse Osmosis System.
The
Hydro RO2 Systems are totally preplumbed, prewired packaged systems
that include a prefilter, storage tank and distribution pump.
This is our most economical space saving
system yet,and is easily installed and ready for immediate use.
Features
-
Heavy
Duty Polyurethane-Coated Cabinet with Sound Reduction
Foam (38 db at 6 feet)
-
Stainless
Steel Pressure Vessels with Sprial Wound Membranes
-
High
Pressure RO Pump
-
Quiet
Stainless Steel Distribution Pump with Variable Frequency
Motor up to 10 GPM
-
Instrumentation:
Temperature Compensated, Dual Channel
-
Resistivity
Monitor for Water Quality Control
-
Level
Controls for Automatic Operation
-
Dome
Top, Dish Bottom FRP Storage Tank
-
Concentrate
and Permeate Flow Gauges
-
Similar
capacity to Hydro's Series A RO system.
-
Ul
listed product
|
|
Click
here for a printable PDF
version of RO2 information.
Back
to Top
Home
• About Hydro • Products
& Services • What's New
• Contact Us • Careers
|
|
